Battery Crimping Tool With Cutting Crimping Punching Die

Short Description:

Micro computer control system-automatically detects the pressure when in crimping with double safety protect.

The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.

If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.

One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.

Send email to us

Product Detail

Product Tags

Product Description

① Head rotates 350°

② LED Light

③ A manual Retraction Button

④ All tools can be controlled by one trigger

⑤ Ergonomic design for one hand operation

⑥ Micro computer control system-automatically detect the pressure

⑦ Li-ion lower power weight ratio with 50% more capacity and shorter charging cycles

Technical Data

Model	EC-60UNV
Crimping force	60KN
Stroke	42mm
Crimping range	16-300mm2
Cutting range	40mm Cu/Al cable and armoured cable
Punching range	22.5-61.5
Crimp/charge	160times
Working cycle	3-16s
Voltage	18V
Capacity	3.0Ah
Charging time	45minutes
Package	Plastic case
Crimping die	16.25.35.50.70.95.120.150.185.240.300mm2
Punching & Die	22.5,28.3,34.6,43.2,49.6,61.5mm
Blade	1set
Adapter for crimping	1pc
Adapter for punching	1pc
3/4" Draw stud/7/16"Draw stud	1pc
Spacer	1pc
Battery	2pcs
Charger	1pc(AC110-240V,50-60Hz)
Sealing ring of cylinder	1set
Sealing ring of safety valve	1set

Model	EC-300	EC-300C	EC-400	EC-400B
Crimping force	60KN	120KN	130KN	130KN
Crimping range	16-300mm2	16-300mm2	16-400mm2	16-400mm2
Stroke	17mm	32mm	17mm	42mm
Crimp/charge	320times(Cu150mm2)	320times(Cu150mm2)	320times(Cu150mm2)	120times(Cu150mm2)
Crimping cycle	3-6s(depend on the size of cable)	3-6s(depend on the size of cable)	10-16s(depend on the size of cable)	10-20s(depend on the size of cable)
Voltage	18V	18V	18V	18V
Capacity	3.0Ah	3.0Ah	3.0Ah	3.0Ah
Charging time	45minutes	45minutes	45minutes	45minutes
Package	Plastic case	Plastic case	Plastic case	Plastic case
Crimping die	16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2	16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2	16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2	16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2
Battery	2pcs	2pcs	2pcs	2pcs
Charger	1pc(AC110-240V,50-60Hz)	1pc(AC110-240V,50-60Hz)	1pc(AC110-240V,50-60Hz)	1pc(AC110-240V,50-60Hz)
Sealing ring of cylinder	1set	1set	1set	1set
Sealing ring of safety valve	1set	1set	1set	1set

General Features:

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

Previous: 160kN Terminal Battery Hydraulic Crimping Tool

Next: Portable Multi-functional Electric Battery Crimping Tool for Cable

Write your message here and send it to us